2205 Duplex Stainless Steel Capillary Coiled Tubing High Efficiency Tubing
2205 duplex stainless steel is a kind of stainless steel in which the proportion of ferrite phase and austenite phase in solid quenching is half and half, which is short for 2205 stainless steel. The actual phase ratio is ferritic 45~55% and austenite 55~45% accordingly. Excellent performance of 2205 duplex stainless steel depends on the appropriate proportion of the two-phase structure to ensure. 2205 duplex stainless steel tubes have excellent mechanical properties and corrosion resistance, as well as good weldability, and are widely used in the petroleum and natural gas industry, Marine engineering, chemical industry and other industries.
Tiptop offers a variety of duplex stainless steel, super duplex stainless steel welded and seamless tubing, depending upon the properties the tubing is required to exhibit. Other alloys and sizes are also available upon request. Duplex stainless steels (named for their austenite and ferrite compositions), has greater yield strength than austenitic stainless steel.
Standard: ASTM-A 789 Standard specification for seamless and welded ferretic/austenitic stainless steel tubing for general service. This specification covers various grades of duplex stainless steels.
Chemical Composition
| Grade |
C |
Mn |
P |
S |
Si |
Ni |
Cr |
Mo |
N |
Cu |
| S31803 (2205) |
0.030 |
2.000 |
0.030 |
0.020 |
1.000 |
4.5-6.5 |
21.0-23.0 |
2.5-3.5 |
0.08-0.20 |
… |
| S322505 (2205) |
0.030 |
2.000 |
0.030 |
0.020 |
1.000 |
4.5-6.5 |
22.0-23.0 |
3.0-3.5 |
0.14-0.20 |
… |
| S32750 (2507) |
0.030 |
1.200 |
0.035 |
0.020 |
0.800 |
6.0-8.0 |
24.0-26.0 |
3.0-5.0 |
0.24-0.32 |
0.500 |
Duplex 2205 Stainless Steel Coiled Control Line Tubing Features
Close dimensional tolerances
Enhanced mechanical properties
Superior surface finish
High cleanness of inside surface
Controlled ovality, eccentricity
Delivery condition
Cold worked
Bright annealed
Annealed and polished
Application
Control line
Chemical injection line
Electrical line
Multi-line flat pack
Hydraulic line
Size Chart
| OD |
Wall
(inch) |
Materials |
Standard |
Working Pressure
(MPa) |
Length |
| 1/8" |
0.02,0.028,0.035 |
Austenitic steel 304L (UNS S30403)
Austenitic steel 316L (UNS S31603)
Duplex 2205 (UNS S32205 & S31803)
Super Duplex 2507 (UNS S32750)
Incoloy 825 (UNS N08825)
Inconel 625 (UNS N06625) |
ASTM-A 269
ASTM-A 632
ASTM-A 789
ASTM-B 704 |
60-120 Mpa |
Customized |
| 3/16" |
0.02,0.028,0.035,0.049 |
| 1/4" |
0.02,0.028,0.035,0.049,0.065.0.083 |
| 5/16" |
| 3/8" |
| 1/2" |
| * OD: Up to 1 inch |
Product Tags:
|
|
2205 Duplex Stainless Steel Capillary Coiled Tubing Images
|
